Configuration#

Overview

Timings
  • Teaching: 10 min

  • Exercises: 15 min

Questions
  • What is the user configuration file and how should I use it?

Objectives
  • Understand how ESMValTool is configured

  • Prepare a personalized ESMValTool configuration

  • Configure ESMValTool to use stored climate data and to download climate data

Compatibility

ESMValTool v2.16.0

Configuring ESMValTool via YAML files#

ESMValTool provides a set of predefined configuration files. These include the files specifying the default configuration values, but also machine-specific files that include data sources for various HPC systems.

To show all available files, run

esmvaltool config list

All configuration files are YAML files.

To customize your configuration via YAML files, you can copy one of the existing files. For example, to copy the file containing the default values for many options, run

esmvaltool config copy defaults/config-user.yml

The default configuration file will be downloaded to the default location: ~/.config/esmvaltool/config-user.yml, where ~ is the path to your home directory. Note that files and directories starting with a period are “hidden”, to see the .config directory in the terminal use ls -la ~. Note, if a configuration file by that name already exists in the default location, the config copy command will not update the file as ESMValTool will not overwrite the file. You will have to move the file first if you want an updated copy of the default user configuration file.

We run a text editor called nano to have a look inside the configuration file and then modify it if needed:

nano ~/.config/esmvaltool/config-user.yml

If nano does not work on your system, or if you prefer a different editor, any other editor can be used, e.g. vim.

This file contains the information for:

  • Output settings

  • Destination directory

  • Auxiliary data directory

  • Number of tasks that can be run in parallel

  • …

Text editor side note

No matter what editor you use, you will need to know where it searches for and saves files. If you start it from the shell, it will (probably) use your current working directory as its default location. We use nano in examples here because it is one of the least complex text editors. Press ctrl + O to save the file, and then ctrl + X to exit nano.

Destination directory#

The example configuration file contains the option output_dir, which is the rootpath where ESMValTool will store its output folders containing e.g. figures, data, logs, etc. With every run, ESMValTool automatically generates a new output folder determined by recipe name, and date and time using the format: YYYYMMDD_HHMMSS.

Set the destination directory

Let’s name our destination directory esmvaltool_output in the current directory. ESMValTool should write the output to this path, so make sure you have the disk space to write output to this directory. How do we set this in the config-user.yml?

Solution

We use output_dir entry in the config-user.yml file as:

output_dir: ./esmvaltool_output

If the esmvaltool_output does not exist, ESMValTool will generate it for you.

Output settings#

Additionally you can configure the output settings that inform ESMValTool about your preference for output. Most of these settings are fairly self-explanatory.

Saving preprocessed data

Later in this tutorial, we will want to look at the contents of the preproc folder. This folder contains preprocessed data and is removed by default when ESMValTool is run. In the configuration, which settings can be modified to prevent this from happening?

Solution

If the option remove_preproc_dir is set to false, then the preproc/ directory contains all the pre-processed data and the metadata interface files. If the option save_intermediary_cubes is set to true then data will also be saved after each preprocessor step in the folder preproc. Note that saving all intermediate results to file will result in a considerable slowdown, and can quickly fill your disk.

Other settings#

Auxiliary data directory

The auxiliary_data_dir setting is the path where any required additional auxiliary data files are stored. This location allows us to tell the diagnostic script where to find the files if they can not be downloaded at runtime. This option should not be used for model or observational datasets, but for data files (e.g. shape files) used in plotting such as coastline descriptions and if you want to feed some additional data (e.g. shape files) to your recipe.

auxiliary_data_dir: ~/auxiliary_data

See more information here in the ESMValTool documentation.

Number of parallel tasks

This option enables you to perform parallel processing. You can choose the number of tasks in parallel as 1/2/3/4/… or you can set it to null. That tells ESMValTool to use the maximum number of available CPUs. For the purpose of the tutorial, please set ESMValTool use only 1 cpu:

max_parallel_tasks: 1

In general, if you run out of memory, try setting max_parallel_tasks to 1. Then, check the amount of memory you need for that by inspecting the file run/resource_usage.txt in the output directory. Using the number there you can increase the number of parallel tasks again to a reasonable number for the amount of memory available in your system.

Customizing your configuration#

By default, configuration files are read from the directory ~/.config/esmvaltool. This can be changed via the ESMVALTOOL_CONFIG_DIR environment variable. In addition another custom configuration directory can be specified via the --config_dir command line argument. We will learn how to do this in the next lesson on recipes.

It is possible to have several configuration files with different purposes, for example: dask_options.yml, data_sources.yml. In this case, ESMValTool searches for all YAML files within each of the configuration directories and merges them together. How this is done is explained in the Configuration section in the ESMValTool documentation.

To show the final configuration that is actually used when running ESMValTool, you can use

esmvaltool config show

Rootpath to input data#

ESMValTool uses several categories (in ESMValTool, these are referred to as projects) for input data based on their source (e.g. CMIP6, CMIP5, obs4mips, OBS6, OBS). For example, CMIP is used for a dataset from the Climate Model Intercomparison Project whereas OBS may be used for an observational dataset. More information about the projects used in ESMValTool is available in the documentation. The data section for each project in the configuration files defines sources of input data. The easiest way to get started with these is to copy one of the example configuration files and tailor it to your needs.

When using ESMValTool on your own machine, the recommended setup can be obtained by running the command

esmvaltool config copy data-local-esmvaltool.yml

After the file data-local-esmvaltool.yml has been copied to your configuration directory ~/.config/esmvaltool/, you can update the rootpath and the dirname_template to match your file locations. The rootpath specifies the directories where ESMValTool will look for input data of the specific project. The dirname_template setting describes the file structure for each project.

If you are working on a HPC system, there are also several configurations for popular HPC systems available that you can use instead, e.g. JASMIN, DKRZ, ETH, and IPSL. To list the available example files, run the command:

esmvaltool config list data-hpc

To load the configuration suitable for the HPC system at DKRZ, run:

esmvaltool config copy data-hpc-dkrz.yml

It is also possible to ask ESMValTool to download climate model data as needed. When running ESMValTool you can automatically download the files required to run a recipe from ESGF for the projects CMIP3, CMIP5, CMIP6, CORDEX, and obs4MIPs. For this, copy the appropriate configuration file by running

esmvaltool config copy data-intake-esgf.yml

Additionally, it is necessary to configure intake-esgf. For this you need to copy the file conf.yaml (see below) into the directory ~/.config/intake-esgf and update the local_cache and esg_dataroot with your desired download directory in this intake-esgf configuration file. The updated file should look like this:

conf.yaml
additional_df_cols: []
break_on_error: true
confirm_download: false
default_open_kwargs:
  chunks: auto
  compat: override
  coords: minimal
  data_vars: minimal
default_project: CMIP7
download_db: ~/.config/intake-esgf/download.db
esg_dataroot:
- /p/css03/esgf_publish
- /eagle/projects/ESGF2/esg_dataroot
- /global/cfs/projectdirs/m3522/cmip6/
- /glade/campaign/collections/cmip.mirror
globus_indices:
  ESGF2-US-1.5-Catalog: true
local_cache:
- ~/.esgf/
logfile: ~/.config/intake-esgf/esgf.log
num_threads: 6
print_log_on_error: false
requests_cache:
  cache_name: intake-esgf/requests-cache.sqlite
  expire_after: 3600
  use_cache_dir: true
slow_download_threshold: 0.5
solr_indices:
  esg-dn1.nsc.liu.se: false
  esgf-data.dkrz.de: false
  esgf-node.ipsl.upmc.fr: false
  esgf.ceda.ac.uk: false
  esgf.nci.org.au: false
stac_indices:
  discovery.east.esgf.io: true
  discovery.west.esgf.io: true

Set the correct rootpaths

In this tutorial, we will work with data from CMIP5 and CMIP6. How can we modify the rootpath to make sure the data path is set correctly for both CMIP5 and CMIP6?

Note: to get the data, check the instructions in Setup: Preparations for participating in the tutorial.

Solution
  • Are you working on your own local machine?

    You need to copy data-local-esmvaltool.yml into your configuration directory and specify the root path of the folder where the data is available (e.g., [YOUR_CLIMATE_DATA_DIR]) as:

    projects:
    ...
      CMIP6:
        data:
          local:
            type: esmvalcore.io.local.LocalDataSource
            rootpath: [YOUR_CLIMATE_DATA_DIR]
            dirname_template: "{project}/{activity}/{institute}/{dataset}/{exp}/{ensemble}/{mip}/{short_name}/{grid}/{version}"
            filename_template: "{short_name}_{mip}_{dataset}_{exp}_{ensemble}_{grid}*.nc"
      CMIP5:
        data:
          local:
            type: esmvalcore.io.local.LocalDataSource
            rootpath: [YOUR_CLIMATE_DATA_DIR]
            dirname_template: "{project.lower}/{product}/{institute}/{dataset}/{exp}/{frequency}/{modeling_realm}/{mip}/{ensemble}/{version}/{short_name}"
            filename_template: "{short_name}_{mip}_{dataset}_{exp}_{ensemble}*.nc"
    
  • Are you working on your local machine and you want to download missing data using ESMValTool?

    You need to configure intake-esgf (see above) and add the root path of the folder where the data has been downloaded to in data-local-esmvaltool.yml as specified in the esgf-cache.

    projects:
    ...
      CMIP6:
        data:
          local:
            type: esmvalcore.io.local.LocalDataSource
            rootpath: [YOUR_CLIMATE_DATA_DIR]
            dirname_template: "{project}/{activity}/{institute}/{dataset}/{exp}/{ensemble}/{mip}/{short_name}/{grid}/{version}"
            filename_template: "{short_name}_{mip}_{dataset}_{exp}_{ensemble}_{grid}*.nc"
          esgf-cache:
            type: esmvalcore.io.local.LocalDataSource
            rootpath: [YOUR_CLIMATE_DATA_DIR]
            dirname_template: "{project}/{activity}/{institute}/{dataset}/{exp}/{ensemble}/{mip}/{short_name}/{grid}/{version}"
            filename_template: "{short_name}_{mip}_{dataset}_{exp}_{ensemble}_{grid}*.nc"
      CMIP5:
        data:
          local:
            type: esmvalcore.io.local.LocalDataSource
            rootpath: [YOUR_CLIMATE_DATA_DIR]
            dirname_template: "{project.lower}/{product}/{institute}/{dataset}/{exp}/{frequency}/{modeling_realm}/{mip}/{ensemble}/{version}/{short_name}"
            filename_template: "{short_name}_{mip}_{dataset}_{exp}_{ensemble}*.nc"
          esgf-cache:
            type: esmvalcore.io.local.LocalDataSource
            rootpath: [YOUR_CLIMATE_DATA_DIR]
            dirname_template: "{project.lower}/{product}/{institute}/{dataset}/{exp}/{frequency}/{modeling_realm}/{mip}/{ensemble}/{version}"
            filename_template: "{short_name}_{mip}_{dataset}_{exp}_{ensemble}*.nc"
    
  • Are you working on a computer cluster like Jasmin or DKRZ?

    Site-specific path to the data for JASMIN/DKRZ/ETH/IPSL are already available in specific configuration files. You need to copy this file in your configuration directory. For example, on DKRZ, run:

    esmvaltool config copy data-hpc-dkrz.yml
    
  • For more information about configuring the data sources, see also the relevant section in the ESMValTool documentation.

Configuration via command line

In addition, all configuration options can also be specified via the command line and those settings will overwrite any setting given by the YAML files. You can find more information in the ESMValTool documentation.

Key points

  • ESMValTool can be configured through YAML files located in ~/.config/esmvaltool or command line arguments

  • The final configuration is created by merging the contents of all YAML files and command line arguments

  • Users can choose to use one big configuration file, or spread its contents among many small configuration files

  • ESMValTool can be configured to automatically download climate data from ESGF